Light meaning and fix
TP-Link Archer A7 / C7 WPS Light Flashing: Meaning
On the TP-Link Archer A7 / C7, a flashing WPS light means a WPS connection is in progress and may take up to 2 minutes.
On the TP-Link Archer A7 / C7, a flashing WPS light means a WPS connection is in progress and may take up to 2 minutes.
What it means
The router is trying to pair with another wireless device through WPS.
Device details
| Device type | Wireless router |
|---|---|
| Brand | TP-Link |
| Model | Archer A7 / C7 |
| Light name | WPS LED |
| Light location | Front panel |
| Color | Green |
| Pattern | Flashing |
| Severity | info |
| Last verified | 2026-05-02 |
What to do first
Wait for WPS pairing to complete, then connect manually if WPS fails.
- Wait up to 2 minutes for WPS to complete.
- Make sure the other device is also in WPS pairing mode.
- Keep the device close enough to the router during pairing.
- If WPS fails, try pairing again once.
- Use the normal Wi-Fi name and password if WPS does not work.
- Check that WPS is enabled and supported by the device.
When this can be normal
This is normal while WPS pairing is active.
When to stop troubleshooting
Stop using WPS if pairing repeatedly fails. Use normal Wi-Fi password setup instead.
Parts or products that may help
Only replace parts when the light pattern and official guidance support it. Some lights indicate setup or software states, not broken hardware.
- No replacement part is recommended from this light pattern alone. Troubleshoot the device state first.
FAQ
How long should the WPS light flash?
TP-Link says the WPS connection process may take up to 2 minutes.
Is flashing WPS an error?
No. It means WPS pairing is in progress.
Do I have to use WPS?
No. You can connect with the normal Wi-Fi network name and password.
This guide is based on: TP-Link Archer A7 & C7 User Guide - LED Explanation.
Source type: official_manual. Confidence: verified. Last verified: 2026-05-02.
WPS behavior depends on the client device and router settings.