Light meaning and fix

APC Back-UPS Red Replace Battery Light: Meaning and Fix

On APC Back-UPS guidance, a solid red Replace Battery LED means the automatic diagnostic test determined the battery is near the end of its useful life.

APC Back-UPS LEDs Red Solid verified
Quick answer:

On APC Back-UPS guidance, a solid red Replace Battery LED means the automatic diagnostic test determined the battery is near the end of its useful life.

What it means

The UPS battery may need replacement soon.

Device details

Device typeUPS battery backup
BrandAPC
ModelBack-UPS LEDs
Light nameRed Replace Battery LED
Light locationUPS front panel
ColorRed
PatternSolid
Severitywarning
Last verified2026-05-02

What to do first

Let the UPS charge overnight, run a self-test, and replace the battery if the warning remains.

  1. Leave the UPS plugged in and turned on overnight with no load if possible.
  2. Run a manual self-test according to APC guidance.
  3. Check whether the Replace Battery LED remains lit.
  4. Verify the correct replacement battery for the exact UPS model.
  5. Replace the battery if needed.
  6. Recycle the old battery properly.

When this can be normal

This is a warning state, not a normal ready state.

When to stop troubleshooting

Stop before buying a battery until you confirm the exact UPS model and compatible replacement battery.

Parts or products that may help

Only replace parts when the light pattern and official guidance support it. Some lights indicate setup or software states, not broken hardware.

  • Compatible APC replacement battery: The Replace Battery LED means the battery may be near the end of useful life.

FAQ

What does red Replace Battery mean?

Schneider Electric says the diagnostic test determined the battery is near the end of useful life.

Should I replace the battery immediately?

APC guidance says to charge overnight and perform a self-test before replacement.

Can I use any battery?

No. Use a replacement battery compatible with your exact UPS model.

Source note:

This guide is based on: Schneider Electric APC Back-UPS LED FAQ.

Source type: official_support_page. Confidence: verified. Last verified: 2026-05-02.

Schneider Electric notes typical battery life depends on use and environment.

View all APC Back-UPS LEDs lights

Helpful next guides

Related light guides

Check nearby model, brand, color, and blinking-pattern pages before assuming the device is broken.

Same model APC Back-UPS All LEDs Flashing: Internal Fault Meaning All LEDs · Multiple LEDs · All LEDs flashing simultaneously Same model APC Back-UPS Red Overload Light: Meaning and Fix Red Overload LED · Red · Solid Same model APC Back-UPS Yellow On Battery Light: Meaning and Fix Yellow On Battery LED · Yellow · Solid Same model APC Back-UPS Green On Line Flashing and Yellow On Battery Solid Green On Line LED and Yellow On Battery LED · Green and yellow · Green flashing with yellow solid Model hub APC Back-UPS LEDs full light guide See every known light pattern for this model. Brand APC light guides Browse all current guides for this brand. Device Battery Backups light guides Browse this device category. Color Red light meanings Compare this color across devices. Pattern Solid light patterns Compare this blink/status pattern.