Light meaning and fix
Epson ET-M1170 Ink Light On: Meaning and Fix
On the Epson ET-M1170, the ink light on can mean initial ink charging or ink refilling may not be complete.
On the Epson ET-M1170, the ink light on can mean initial ink charging or ink refilling may not be complete.
What it means
The printer may not be ready because the ink charging/refilling process has not been completed correctly.
Device details
| Device type | EcoTank monochrome printer |
|---|---|
| Brand | Epson |
| Model | ET-M1170 |
| Light name | Ink light |
| Light location | Printer control panel |
| Color | Ink status light |
| Pattern | On |
| Severity | caution |
| Last verified | 2026-05-02 |
What to do first
Follow Epson's Start Here instructions for initial ink charging or refilling.
- Do not assume the printer is ready just because ink is in the tank.
- Review the Epson Start Here instructions.
- Complete the initial ink charging or refilling process.
- Do not interrupt the printer while ink charging is in progress.
- Restart only after following the setup guidance.
- Contact Epson support if the ink light remains on.
When this can be normal
This can appear during setup or refilling if the process is not complete.
When to stop troubleshooting
Stop if ink charging does not complete or the light remains after following Epson setup guidance.
Parts or products that may help
Only replace parts when the light pattern and official guidance support it. Some lights indicate setup or software states, not broken hardware.
- Correct Epson ink: The printer requires the proper ink and completed charging/refill process.
FAQ
Does ink light on mean empty ink?
Not always. Epson says initial ink charging or refilling may not be complete.
Should I turn it off during ink charging?
No. Do not interrupt ink charging.
What instructions should I follow?
Use Epson's Start Here setup instructions for this model.
This guide is based on: Epson ET-M1170 Product Light Status.
Source type: official_support_page. Confidence: verified. Last verified: 2026-05-02.
Initial ink charging is part of setup and should not be interrupted.