Light meaning and fix
HP DeskJet 2700 Wireless Light Blinking Blue: Meaning and Fix
On the HP DeskJet 2700, a blinking blue Wireless light with cycling signal bars means the printer is in Auto Wireless Connect setup mode.
On the HP DeskJet 2700, a blinking blue Wireless light with cycling signal bars means the printer is in Auto Wireless Connect setup mode.
What it means
The printer is waiting to be connected to a Wi-Fi network using HP's wireless setup flow. This is a setup state, not a hardware failure by itself.
Device details
| Device type | All-in-one inkjet printer |
|---|---|
| Brand | HP |
| Model | DeskJet 2700 |
| Light name | Wireless light |
| Light location | Control panel near the Wireless button |
| Color | Blue |
| Pattern | Blinking |
| Severity | info |
| Last verified | 2026-05-02 |
What to do first
Continue Wi-Fi setup from the HP app or setup software. If setup fails, restart wireless setup mode and move the printer closer to the router.
- Keep the printer powered on during setup.
- Open the HP setup app or printer setup software on your phone or computer.
- Make sure your phone or computer is connected to the Wi-Fi network you want the printer to use.
- Move the printer closer to the router if setup fails.
- Restart the wireless setup flow if the printer times out.
- If the printer was previously connected to a different network, restore Wi-Fi setup mode and try again.
When this can be normal
This is normal during first-time setup or after restoring Wi-Fi setup mode.
When to stop troubleshooting
Stop and check HP support if the printer never appears in the setup app or the wireless light changes to an error pattern.
Parts or products that may help
Only replace parts when the light pattern and official guidance support it. Some lights indicate setup or software states, not broken hardware.
- No replacement part is recommended from this light pattern alone. Troubleshoot the device state first.
FAQ
Is the blinking blue HP wireless light bad?
No. In this setup state, it usually means the printer is ready for Auto Wireless Connect.
What should I do first?
Continue setup in the HP app or software and make sure the printer is close enough to the Wi-Fi router.
Does blinking blue mean the printer is connected?
No. A steady blue wireless light is the connected state. Blinking blue is a setup or connection process.
This guide is based on: HP DeskJet 2700 User Guide - Control Panel Lights and Display Icons.
Source type: official_manual. Confidence: verified. Last verified: 2026-05-02.
This applies to the HP DeskJet 2700 series guidance in the HP user guide.