Light meaning and fix
Blink Sync Module Solid Blue and Blinking Green Lights
On a Blink Sync Module, solid blue with blinking green means the module has fallen offline and is trying to reconnect to the previous Wi-Fi network.
On a Blink Sync Module, solid blue with blinking green means the module has fallen offline and is trying to reconnect to the previous Wi-Fi network.
What it means
The Sync Module is powered but not currently online. It is attempting to reconnect to the Wi-Fi network it was previously configured for.
Device details
| Device type | Camera sync module |
|---|---|
| Brand | Blink |
| Model | Sync Module |
| Light name | Sync Module LEDs |
| Light location | Front of Sync Module |
| Color | Solid blue and blinking green |
| Pattern | Solid blue with blinking green |
| Severity | warning |
| Last verified | 2026-05-02 |
What to do first
Check Wi-Fi, power, and router status, then reconnect the Sync Module if it does not come back online.
- Check whether your Wi-Fi network is online.
- Make sure the Sync Module is plugged in and close enough to the router.
- Wait briefly to see whether it reconnects.
- Restart the router if other devices are also offline.
- Power cycle the Sync Module.
- Use Blink's reconnect or change Wi-Fi flow if it does not reconnect.
When this can be normal
This can happen after Wi-Fi changes, router reboots, or temporary network outages.
When to stop troubleshooting
Stop and check Blink support if the module cannot reconnect after verifying Wi-Fi and power.
Parts or products that may help
Only replace parts when the light pattern and official guidance support it. Some lights indicate setup or software states, not broken hardware.
- No replacement part is recommended from this light pattern alone. Troubleshoot the device state first.
FAQ
What does solid blue and blinking green mean?
Blink says the Sync Module is offline and attempting to reconnect to the previous network.
Should I reset it immediately?
No. First check Wi-Fi, power, and whether it reconnects on its own.
Could this happen after changing routers?
Yes. If the Wi-Fi network changed, you may need to reconnect or reconfigure the Sync Module.
This guide is based on: Blink Sync Module Troubleshooting.
Source type: official_support_page. Confidence: verified. Last verified: 2026-05-02.
This entry applies to Blink Sync Module LED guidance, including Sync Module Core, XR, 1st Gen, and Sync Module 2 sections where listed.